Specifications: FMC-2
Package Contents: FMC-2
QuickStart Guide (downloadable)
FM Receiver:
Frequency Range: 87.5-108 MHz (World Wide except Japan)
76.0-95.0 MHz (Japan)
Channel Spacing: 200kHz (North America)
100kHz (all other regions)
De-emphasis: 75µs (North America)
50µs (all other regions)
Audio Response: 30Hz-15kHz -3dB
Audio Output:
Output Level: Adjustable from 333mVpp to 10.6Vpp
Output Impedance: 1.5K
Audio Response: 60Hz-15kHz -3dB
Withstand Voltage: +/- 50V max
Auxiliary Input:
Input Level: -10dBV nominal level
0dBV maximum without clipping
Input Impedance: ~3K Unbalanced
Withstand Voltage: +/- 20V max
Local Oscillator Input:
Input Level: 0.5Vpp to 50Vpp
Frequency Range: 500kHz to 4.0MHz
Stop Output:
Withstand Voltage: 300V max
Sink Current: 2ma max
Pulse Width: 5ms
Sensitivity Input:
Input Impedance: ~780K
High Sensitivity: 0.0V to 8.0V
Low Sensitivity: 8.0V to 30V
Electric Pushbutton: 30V to 150V
(Wonderbar®)
LED Output:
Output Impedance: 480 Ohm typical
Drive Voltage: 3.0V
Drive Current: 2.5ma typical with 1.8V LED drop
Signal Seeking Tuner Performance:
Minimum Tracking: 30ms/channel
3 seconds for 200kHz channels (North America)
6 seconds for 100kHz channels (World Wide)
4.5 seconds for 100kHz channels (Japan)
General:
Dimensions: 1.00”W X 1.25”D X 0.15”H
(25mm X 32mm X 4mm)
Power Requirements: 6.0V Operation
4.5V to 9.0Vdc range
7.0Vdc typical
71ma typical
12V Operation
9.0 to 18.0Vdc range
14.0V typical
50ma typical
Humidity: 0% - 90% non-condensing
Temperature: -25C to +65C ambient (-13F to +150F) Operating
-40C to +125C ambient (-40F to +257F) Storage
At Aurora Design we are understandably proud to list
all our specs for your evaluation.
The design, features and quality of our products speak for themselves!
Designed and built in the USA
All specifications subject to change.
Actual performance dependent on installation.
Wonderbar® is a trademark of Delco Electronics
FMC-2 FM Tuner