Specifications: SCRF Converter
Package Contents: SCRF Converter
QuickStart Guide
Video Input:
Supported Standards: NTSC 29.97fps / PAL 25fps / SECAM 25fps
Video Quantization: 9bit A/D, 8 bit data
Video Input: Composite - 1Vpp, 75Ω impedance
Video SNR: 54dB
Video Output:
Video Output: Composite - 1Vpp into 75Ω
Video Quantization: 10 bit effective D/A
Video Levels: +/- 3% of output standard
Video Timing: +/- 50 ppm Line/PLL Locked, < 2ns jitter typical
Video SNR: 56dB typical
Video Bandwidth: 6.0MHz -3dB
Audio Input:
Audio Input: Unbalanced, > 20KΩ impedance
-10dBV nominal input level
0.2Vpp to 5Vpp maximum
Audio Response: 50Hz to 15KHz, +/- 2db
RF Output:
RF Output: 76dBµV (6.3mv) typical into 75 ohms
Crystal/PLL frequency generation
Video SNR: 56dB typical
Modulation Depth: 99% maximum
Audio SNR: 54dB typical
General:
Dimensions: 2.60”W X 2.60”D X 1.00”H
(66mm X 66mm X 25mm)
Weight: 2.5oz (70g)
Power Requirements: 2.1mm X 5.5mm center positive connector
9.0Vdc typical, 7.0-14Vdc
2.0 watts typical (Full Operation)
1.0 watts typical (Sleep Mode)
Humidity: 20% - 80% non-condensing
Temperature: 10C - 40C ambient (50F - 104F)
Specifications: SCM Converter
Package Contents: SCM Converter
QuickStart Guide
Video Input:
Supported Standards: NTSC 29.97fps / PAL 25fps / SECAM 25fps
Video Quantization: 9bit A/D, 8 bit data
Video Input: Composite - 1Vpp, 75Ω impedance
Video SNR: 54dB
Video Output:
Video Output: 1Vpp into 75Ω
Video Quantization: 10 bit effective D/A
Video SNR: 56dB typical
Video Bandwidth: 6.0MHz -3dB
Reference Input:
Reference Input: Unbalanced, > 20KΩ impedance, +/-30V maximum,
DC Coupled Zero Crossing Detect, (selectable edge)
Lock Range: +/-4% of AC Mains or Frame frequency
General:
Dimensions: 2.60”W X 2.60”D X 1.00”H
(66mm X 66mm X 25mm)
Weight: 2.0oz (57g)
Power Requirements: 2.1mm X 5.5mm center positive connector
9.0Vdc typical, 7.0-14Vdc
1.5 watts typical (Full Operation)
1.0 watts typical (Sleep Mode)
Humidity: 20% - 80% non-condensing
Temperature: 10C - 40C ambient (50F - 104F)
Specifications: SCM Converter with current driver output (same as above plus:)
Current Output:
Current Output: 333ma maximum current
14Vdc maximum (12Vdc recommended when driving NEL-1M)
Thermal Overload Protection
2.5mm X 5.5mm center positive connector
Single Converter SC