New Features!
• Larger FLASH Memory for up to two stored default images
• New Digital Sound Trap Filter
• Lower Price
The Single Converter family of products was designed for those users who do not require all the power and flexibility of the World Converter. For those users who only need one or two different standards, the Single Converter family provides the utmost in cost/performance ratio.
SCRF converters for electronic televisions:
The SCRF family of converters are a low cost alternative to the WC-01 World Converter while still retaining the most requested features such as the selectable RF modulator and a FLASH image memory for storing up to two frames of video. One of the FLASH image memories is initially programmed with an appropriate test pattern such as Test Card C for the SCRF405A units, or the RCA Indian Head test pattern for the SCRF441M unit.
Using a novel, proprietary D/A, and state of the art FPGA, this converter provides an exceptionally high quality and accurate output. All conversions are done using three input lines, and a minimum of 12 bits internal accuracy. The converter also uses a novel “partial field memory scheme” that provides stable output line syncs regardless of the input video. All units have a converter bypass mode which allows the unit to be used as just an RF modulator, allowing the experimenter to provide their own video signal.
Operation is as simple as supplying a 7-14Vdc @ 250ma supply to the unit (supplied by the user, not included with converter), connecting an audio/video source from a DVD, VCR, Satellite receiver, etc. and connecting the RF output to the television. The unit is small enough (2.6” square) and low power enough (2W typical) to be hidden inside a television or receiver.
Versions are available for the most popular electronic television formats.
SCRF405A PAL(625) to 405/25i with RF System A modulator
SCRF405A-NTSC * PAL(625) to 405/25i NTSC color with RF System A modulator
SCRF441X PAL(625) to 441/25i with RF Berlin I/II modulator
SCRF819E PAL(625) to 819/25i with RF System E modulator
SCRF819F PAL(625) to 819/25i with RF System F modulator
SCRF343A NTSC(525) to 343/30i with RF System A modulator
SCRF343X NTSC(525) to 343/30i with RF System M modulator
SCRF441M NTSC(525) to 441/30i with RF System M modulator
SCRF525M-SC NTSC(525) to 525/30i field sequential color with RF System M modulator
SCM converters for mechanical televisions:
The SCM family of converters are a low cost alternative to the WC-01 World Converter while still retaining the most requested features such as multiple output standards and internal LED current driver.
Using a novel, proprietary D/A, and state of the art FPGA, this converter provides an exceptionally high quality and accurate output. All conversions are done using a minimum of 12 bits internal accuracy. The converter also uses three full frame buffers that provides a stable output regardless of the input video. They also provide a Reference Input that can be driven by an AC Mains or frame reference signal for synchronizing the converters output to the television.
Operation is as simple as supplying a 7-14Vdc @ 200ma supply to the unit (supplied by the user, not included with converter), connecting a video source from a DVD, VCR, Satellite receiver, etc. and connecting the video or optional current output to the television. The unit is small enough (2.6” square) and low power enough (2W typical) to be hidden inside a television or receiver.
Versions are available for the most popular mechanical television formats.
SCM-01 * NTSC(525)/PAL(625) to all formats from 24/15p through 60/25p including
standards such as Baird, NBTV, Western, TeKaDe, etc.
SCM-01D * Same as SCM-01 but with internal current driver for direct connection to
LED arrays like the NEL-1M.
For a full description of the features and operation of these converters, please refer to the User Manual’s on the Download page.
* These converters are not normally stocked. Please inquire about availability.
Single Converter SC